Sony Alpha camera supported by Sony SDK (Software Development Kit)
Compact size, full-frame power
Learn more
Sony Alpha camera supported by Sony SDK (Software Development Kit)
Digital Video Camera using various interfaces (USB, Gigabit Ethernet, Camera link)
This is no longer in our current product line up. Click the button below to contact us and we will advise you on which of our current products meets your specific requirements.
Ideal for use in space-limited locations, the DXC-C33/C33P incorporates one of the smallest/lightest camera head unit featuring three 1/3 type CCDs.
In spite of its compact (32 (W) x 38 (H) x 40 (D) mm, (1 5/16 x 1 1/2 x 1 5/8 inches) and lightweight (48 g, 1.7 oz) camera head unit, this model inherits superb picture quality of the DXC Series.
Small camera head
The DXC-C33/C33P can be installed in space-limited locations. The size of the camera head unit (CHU) is one of the smallest of all the 1/3 type 3-CCD cameras.
High picture quality
The DXC-C33/C33P can clearly capture detailed images of objects. Adoption of three 1/3 type CCDs allows the camera to realize 2000 lux at F8, S/N ratio of 62 dB (NTSC) or 61 dB (PAL) and achieve a horizontal resolution of 850 TV lines.
DV out
DV output terminal allows image recording into i.LINK interface-equipped VTR with no quality deterioration. This feature is first introduced to small head 3CCD cameras.
10-bit DSP
The DXC-C33/C33P can capture superior pictures by adopting full Digital Signal Processing (DSP) of 10 bits.
DynaLatitude
This function automatically adjusts contrast corresponding to the brightness signal level of the entire image. Clear images can be captured if both bright and dark areas exist within an image.
Frame memory
Built-in frame memory can provide a freeze image and a remarkably enhanced image in sensitivity by longtime exposure function. Images captured by long-time exposure function can be output continuously.
Partial Enhance
This function allows a particular color to be selected, and its hue, saturation and detail altered. In addition, the detail produced by the high resolution of the camera can be softened or emphasized in certain parts of the image by the Partial Enhance function.
User-friendly control panel
The front panel is easy to use with smartly arranged knob switches and good-sized switches.
Two AE areas preset
AE (Automatic Exposure) function is very useful to determine the best area for incoming light metering. Users can select and set up two of the six different AE modes and can easily switch them at front panel.
RS-232C interface
Easy control and operation of the camera by an external computer is possible.
External synchronization (HD/VD, VBS)
External, synchronization allows for multiple camera operation.
Pick-up device
1/3 type IT (Interline Transfer) CCD (x3)
Effective picture
NT SC: 768 (H) x 494 (V)
Elements
PAL : 752 (H) x 582 (V)
Sensing area
4.8 (H) x 3.6 (V) mm
Scanning system
NT SC: 2:1 interlaced, 525 lines
PAL : 2:1 interlaced, 625 lines
Horizontal
NT SC: 15.734 kHz
Frequency
PAL : 15.625 kHz
Vertical frequency
NT SC: 59.94 Hz
PAL : 50 Hz
Sync system
Internal or external with VBS or HD/VD
Phase control
H/SC phase control
Horizontal resolution
850 TV lines
Lens mount
C mount
Flange back
17.526 mm in air
Sensitivity
F8.0 at 2000 lux (3200 K)
Minimum illumination
4 lux (F2, GA IN: HYPER)
S/N ratio
NT SC: 62 dB (Typical)
PAL : 61 dB (Typical)
Gain
STE P/AG C/HYPER selectable
STE P: 0 to 24 dB by 1 dB step
AG C: 0 to 24 dB (Limit value: 6 dB, 12 dB,
18 dB, 24 dB selectable)
HYPER: 30 dB
Electronic shutter
8.0 to 1/100,000 s
Lens
Manual Iris
AE area
Multi/Large/Medium/Spot/Slit/Manual selectable
AE level
Variable
AE speed
Fast/Mid/Slow selectable
AE detect
Average/Peak selectable
Contrast effect
Manual/DynaLatitude/DCC+ selectable
Knee point
High/Normal/Low selectable
(Contrast Effect: Manual)
Black stretch
Variable (Contrast Effect: Manual)
Gamma
ON /OFF (Variable at ON)
Pedestal
Master and R/B Manual adjustable
Black balance
ABB
White balance
AWB/AT W NO RMAL /AT W WIDE/
MANUAL /3200 K/5600 K selectable
AWB or AT W R/B Paint,
MANUAL R/B Gain
ATW area
NORMAL/MANU selectable
ATW speed
FAST/NORMAL/SLOW selectable
Detail level
ALL/TARGET/OFF (Variable at ALL or TARGET )
Detail frequency
HIGH/MID/LOW selectable
Linear matrix
ALL/TARGET/OFF
Linear matrix
STANDARD/R Enhance/G Enhance/
Mode
B Enhance/Manual selectable
Partial enhance
ALL/IN/OUT selectable
CCD integration mode
FIELD/FRAME selectable
Shading compensation
OFF/ON (Manual control)
Trigger polarity
Positive edge trigger/Negative edge trigger selectable
Baud rate
19200/9600/4800/2400/1200 selectable
Sync
RGB/G/OFF selectable
Strobe
Slave
User file
A/B switchable
(Two pattern memories)
Scene file
STAN DARD/MICROSCOPE/FULL AUTO /STROBE/FILE A or B
Output signal
i.LINK (DV): IEEE1394 Based
VBS: 1.0 Vp-p, 75 Ω, sync negative
RGB: 0.7 Vp-p, 75 Ω, sync switchable
SYNC: 2 Vp-p, 75 Ω
Y: 1.0 Vp-p, 75 Ω
C: NTSC 0.286 Vp-p, 75 Ω, without sync
PAL 0.3 Vp-p, 75 Ω, without sync
Operating temperature
-5 to 45°C (23 to 113°F)
Storage temperature
-20 to 60°C (-4 to 140°F)
Power supply
100 to 240 V AC, 50/60 Hz
Power consumption
Max. 18 W
Dimensions
CHU: 32 (W) x 38 (H) x 40 (D) mm
(1 5/16 x 1 1/2 x 1 5/8 inches)
CCU: 200 (W) x 88 (H) x 242 (D) mm
(7 7/8 x 3 1/2 x 9 5/8 inches)
Mass
CHU: 48 g (1.7 oz)
CCU: 2.5 kg (5 lb 8 oz)
Connectors
DV OUT (6-pin jack)
RGB/SYNC (9-pin D-sub)
VIDEO OUT (BNC)
S-VIDEO (4-pin mini DIN)
FS/TRIG IN (Stereo Mini jack)
REMOTE (8-pin mini DIN)
AC Inlet
Camera (20-pin)
Supplied
Tripod adaptor
Accessories
AC power cable
Lens cap
Panel sheet for RM-C950
Operation instruction manual
Sensor | |
---|---|
Key Features | |
Resolution | |
Video format | |
Speed | |
Optical zoom (lens) | |
Digital zoom | |
Super resolution zoom | |
Storage | |
Lens | |
Live view | |
Width | |
Height | |
Depth | |
Weight | |
Interface | |
Video output | |
Partial scan/binning | |
IEEE1588 compliant | |
HW & SW trigger | |
Noise filter | |
DC 12 V (PoE) | |
Shading/ defect correction | |
Frame accumulation | |
WDR | |
LUT | |
FOV | |
External synchronization | |
Power consumption | |
Image stabilization | |
Noise reduction | |
Visca command | |
Sensitivity | |
Others |
Optional Accessories:
NF-Mount Lens
VCL-08WM
VCL-16WM
VCL-25WM
DVCAM™ Series
DSR-20MD
DSR-20MDP
Remote Control Unit
RM-C950
20-pin Multi Cable (5/10/30 m)
CCMC-20P05
CCMC-20P10
CCMC-20P30
i.LINK Cable (1.5/3.5 m)
VMC-IL4615
VMC-IL4635
9-pin D-sub Cable
CCXC-9DB
CCXC-9DD
9-pin D-sub Cable
CCMC-9DS
You may need to be logged in to have access to some documents.
Below are a number of tools and resources dedicated to support the promotion of Sony XC Cameras.