EVI-D70/P

216x Zoom Ratio
(18x Optical, 12x Digital)

Wide-Range, High-Speed Pan/Tilt

- Pan angle: -170º to +170º

(max. pan speed: 100º/s)

- Tilt angle: -30º to +90º

(max. tilt speed: 90º/s)

Superb Picture Quality with EXview HAD CCD^TM

The adoption of Sony EXview HAD CCD^TM technology improves basic camera performance. For example, these cameras offer superb sensitivity of 1 lx (typical), and a low smear level and D-range.

- Minimum illumination: 1 lx

- Horizontal resolution:

470 TV lines (EVI-D70)

460 TV lines (EVI-D70P)

Ceiling-Mount or Desktop Installation

RS-232C or RS-422 Serial Control (VISCA^TM Command)

All camera settings and pan/tilt/zoom functions can be controlled remotely via a PC.

With the RS-232C connection, maximum cable length can be extended to 15 m (50 feet), while the RS-422 connection extends this further to 1200 m (4000 feet).

Auto ICR (IR Cut filter Removal) Function

The Auto ICR function automatically switches the settings to attach or remove the IR Cut filter for increased sensitivity. With a set level of darkness, the IR Cut filter is automatically disabled (ICR ON), and the infrared sensitivity is increased. With a set level of brightness, the filter is automatically enabled (ICR OFF). The ICR automatically engages depending on the ambient light, allowing the cameras to be effective both in day and night environments.

Alarm Function and AE Spot Setting

The EVI-D70/D70P cameras provide an alarm function that can detect changes within a userdesignated area of an image.*When a change in AF, AE or both is detected, these cameras output an alarm trigger signal to the external equipment via the VISCA^TM protocol. In combination with the Spot AE function, these cameras also detect changes in the luminance level, and they output an alarm signal. The detecting area can be applied to any of 16 vertical and 16 horizontal blocks. 

Auto Power-Off/Night Power-Off Function

Daisy Chain Capability (Up to Seven Cameras)

Six-Position Preset

Multi-Function IR Remote Commander® Unit

EVI-D30/D31 Emulation Mode

_{* Using any of the pan/tilt/zoom functions will disable the alarm}