216x Zoom Ratio
(18x Optical, 12x Digital)
Wide-Range, High-Speed Pan/Tilt
- Pan angle: -170º to +170º
(max. pan speed: 100º/s)
- Tilt angle: -30º to +90º
(max. tilt speed: 90º/s)
Superb Picture Quality with EXview HAD CCDTM
The adoption of Sony EXview HAD CCDTM technology improves basic camera performance. For example, these cameras offer superb sensitivity of 1 lx (typical), and a low smear level and D-range.
- Minimum illumination: 1 lx
- Horizontal resolution:
470 TV lines (EVI-D70W)
460 TV lines (EVI-D70PW)
Ceiling-Mount or Desktop Installation
RS-232C or RS-422 Serial Control (VISCATM Command)
All camera settings and pan/tilt/zoom functions can be controlled remotely via a PC.
With the RS-232C connection, maximum cable length can be extended to 15 m (50 feet), while the RS-422 connection extends this further to 1200 m (4000 feet).
Auto ICR (IR Cut filter Removal) Function
The Auto ICR function automatically switches the settings to attach or remove the IR Cut filter for increased sensitivity. With a set level of darkness, the IR Cut filter is automatically disabled (ICR ON), and the infrared sensitivity is increased. With a set level of brightness, the filter is automatically enabled (ICR OFF). The ICR automatically engages depending on the ambient light, allowing the cameras to be effective both in day and night environments.
Alarm Function and AE Spot Setting
The EVI-D70W/D70PW cameras provide an alarm function that can detect changes within a userdesignated area of an image.*When a change in AF, AE or both is detected, these cameras output an alarm trigger signal to the external equipment via the VISCATM protocol. In combination with the Spot AE function, these cameras also detect changes in the luminance level, and they output an alarm signal. The detecting area can be applied to any of 16 vertical and 16 horizontal blocks.
Auto Power-Off/Night Power-Off Function
Daisy Chain Capability (Up to Seven Cameras)
Multi-Function IR Remote Commander® Unit
EVI-D30/D31 Emulation Mode
* Using any of the pan/tilt/zoom functions will disable the alarm
Supplied accessories :
- AC adaptor
- Ceiling Bracket
- IR remote commander unit
- Operating instruction
- RM-BR300 : Joystick Remote Control Unit for Most Sony PTZ Cameras
The Sony RM-BR300 remote control unit can control the Sony PTZ cameras, either individually or daisy-chained!
This stylish controller has a Sony ergonomic, easy-to-use design and features a joystick. The control interfaces are RS-232C and RS-422 based on VISCA protocol. The RM-BR300 controls all major camera functions, including access to the menu and preset functions.
The SONY RM-BR300 PTZ camera joystick camera controller is designed to provide AV system.
Integrators with a broadcast quality joystick camera controller that can control any of the Sony PTZ camera.
The Controller can be used as a stand-alone camera controller or be combined with a video switching provided by one of our partners.
Additional camera pre-sets and additional camera control capabilities to your project.
Features of the Sony RM-BR300 include camera positioning, zoom and focus, backlighting, camera pre-set memory recall and storage, Multi-camera control, Pan/Tilt speed control and complete VISCA compatibility.
Sony EVI-SD Downloads
You may need to be logged in to have access to some documents.
*You may need to be logged in to have access to some documents.
Our resource section is only available to logged in users